sasung lcd This is a topic that many people are looking for. khurak.net is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, khurak.net would like to introduce to you Samsung Galaxy S9 – How to Take Apart & Replace LCD Glass Screen. Following along are instructions in the video below:
“There everyone in this video. I m gonna be showing you how to take apart apart and replace the glass lcd screen assembly on your samsung galaxy s 9 welcome cellular pros in this channel. We do tech reviews and tutorials so if you need to the channel. I welcome you to subscribe all right guys let s go right to the video.
Now okay so first off let s make sure that the phone is powered off if not then powered off next up. We re gonna need to give it some heat and on the back cover with either a hairdryer or heat gun. If you re gonna use a heat gun make sure to move around consistently not staying in one spot. So that you don t burn the inside of the phone or you can set it on a hot plate.
Which is what i prefer to use as i m going to show you here and i set it to about 110 to 115 degrees celsius and leave it on there for a few minutes until it s hot enough and keep in mind that we will have a link in the description. Where you can buy the parts and tools used for this repair. So here s some of the tools we re going to be using we re gonna be using a suction cup. I m gonna be using some guitar picks.
So once you feel the phone is hot enough you may want to get it we can also use a folded business card. As well as a prying tool alright. So let s go ahead and get the phone while it s hot and we re gonna place the suction cup towards the bottom here and we re gonna give it some suction until we see a slight opening in between the glass and the metal frame of the phone. So continue to pull up gently on the suction cup.
Until you see a small separation opening up if you see that the phone starts cooling down don t be afraid to give it some more heat. So that the adhesive loosens up more so as you can see now we re starting to see the separation. Here. I m gonna stick the guitar pick inside.
Now and there we go so just gently push in the pic and once it s in there you can remove the suction cup. So i m gonna use the help of another pic here you can use as many as you want i m gonna use this one to wedge it in on this side of the back cover. So i m gonna use a third pic here because i m doing this very carefully we re gonna go slowly down each side with each of the pics. But first i m gonna give it some more heat as well to loosen up the adhesive.
So here we go now that i heated up two more. I m going to continue to go downwards on each side. As you can see the pic is moving easier down the side. So continue to work downwards and take your time don t rush.
It so you don t break the back cover. If it s not broken once most of the back cover is removed you can start pulling up from the bottom. And most of the adhesive will release and then next thing you may want to do is wiggle. It around a little bit to release any leftover adhesive on there and the back cover will come off completely also remember to be careful with this flex cable.
That connects the fingerprint scanner to the phone. So with the back cover now out of the way. The next step is to remove the 15 small phillips head screws holding on the back frame of the phone. So with a small phillips head screwdriver.
We re going to go ahead and remove that next next up. We re gonna need to remove the back plastic housings here. So we re gonna give them some pressure upwards you can do it with the prank tool or with your fingernail. Be careful with this antenna cable here for the wireless charger.
Pull up on the plastic gently. And it will come right out it might have some adhesive still holding it on but you can pull that right off so next up we re gonna pull up on the bottom part here which is the loudspeaker so we re gonna need to give it some pressure upwards as well and remove the adhesive holding it on there. If the adhesive comes up a bit and just place it back down around the edges. Where it was before okay.
So once that is done next step is we need to disconnect the battery flex cable to stop any electricity from flowing through the phone then that s disconnect the lcd cable flex cable which you see right here if all you need to do is replace the lcd screen assembly. Then here you would have to heat up the old screen assembly here with the hairdryer again heat gun and once it s hot enough you re gonna pry up on the glass and lcd screen here and we re gonna pull it off completely so that we can place the new one in okay. But let s go ahead and continue with this take apart tutorial so next up is we re gonna need to heat up the phone once again on the screen until it s hot enough so that we can pry up on the battery here and remove it completely next up. We re gonna need to remove another philips head screw here holding down the motherboard we need to go ahead and remove the sim card tray if you haven t done so already so let s remove that now so now we can go ahead and disconnect.
The flex cable over here for the volume button disconnect. The flex cable at the top for the front selfie camera and the this antenna connector down. Here as well. Which goes connected to the charger port.
Let s go ahead and disconnect. All of the antennas at the bottom connect it to the charger port once you have those cables connected. We can go ahead and lift up on the motherboard. Let s take a prank tool.
Under it like the guitar pick or you can wedge it up with your fingers as well so wiggle the motherboard around and it will come right out remember. There s one more flex cable connected on the bottom. The charger port connector. So remove that and the motherboard comes out completely so next up we need to remove the charger ports.
So there s gonna be five small phillips head screws holding it down. So let s get the phillips head screwdriver and remove those now once you have all the screws removed. We need to begin pulling up on the charger port. So we re gonna begin with this thin antenna cable.
Here as you can see wedge something thin preferably plastic in between it to release the adhesive holding it down and it comes out just pull it out a little bit. Because it is attached to the charger port. Once you have that out we can go ahead and begin to pull up on the charger port giving it some pressure releasing the adhesive and also make sure to pull out the antennas from the brackets holding them down and last. We re gonna need to pry up around the headphone jack area gently.
And it comes out completely in one piece and now let s go ahead and begin removing all of these small parts left on the frame. So let s remove the front camera assembly. Here. There s your front selfie camera.
Let s go ahead and remove the ear speaker. So with something solid. It s going to pry up on it to release the adhesive and pull it out next up is the vibrator motor. So we re gonna need a thin solid prying tool to get under it to be able to pry up and release.
It one more thing that we re gonna need to remove is this bracket up here this is for the proximity sensor and it comes off fairly easily and there we have it your samsung galaxy s 9 is completely taken apart so once you re ready just go ahead and place everything back together in reverse order. So once you re ready let s go ahead and place the back cover back on the phone so first we re going to need to connect the fingerprint scanner flex cable so position it correctly on top of the connector and press it down until you feel it click there we go so that one connected and then all we have to do now is position the back cover right on top of the phone position the corners first so that it aligns correctly and then push it down on other sides give it some pressure so that it can glue back down to the housing of the phone. Please keep in mind that after doing this your phone s waterproof rating. Will not be valid.
Anymore so this was just a quick video on how to take apart and replace the lcd glass screen assembly on your samsung galaxy s 9 alright everyone so that is it for this video i hope you enjoyed it if you did please give it a like it really helps the channel out a lot and as always i ll see you around in ” ..
Thank you for watching all the articles on the topic Samsung Galaxy S9 – How to Take Apart & Replace LCD Glass Screen. All shares of khurak.net are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.