funai dvd recorder vcr This is a topic that many people are looking for. khurak.net is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, khurak.net would like to introduce to you DVD/VHS Recorder Tutorial. Following along are instructions in the video below:
“You for checking out the library s dvd vhs dubbing unit in this video. We we ll show you how to record a vhs tape to a dvd disc. Before the process an important note is that this unit does not support dvd r or dvd rw discs make sure you ve purchased dvd r or dvd. Rw discs or the recording process will not complete to begin open the two latches on the dvd vhs units case inside you ll find a quick start guide.
The unit s full operation manual. The contents list and the unit itself you ll also find a set of yellow white and red composite rca cables an hdmi cable and the device s remote control please make sure all these pieces are present and accounted for when returning the unit. If your tv has an hdmi connection plug one end of the included hdmi cable into the port shown here then plug the other end into your tv s hdmi port. If you re having trouble finding the port.
It s usually on the side or the rear of your television set for older tvs. You may need to connect the rca plugs to the ports. Shown here on the unit next connect the other end of the cables to your television set..
If you see five plugs instead of three on your television. This is what s known as component video plug the yellow cable into the green port and connect the red and white audio cables to their matching ports at this point you should also plug in the dvd vhs units power cable to a wall outlet after all your connections are made you can turn on your television switch to the correct input and we re ready to begin the process if you need help selecting the input on your tv look on your tv s remote control for a source or input button or look in your tv s owner s manual for further information to begin press. The power button on the front of the unit. You should see the unit display.
The word load and the screen should turn on and display a colorful dvd backdrop followed by a dark screen press. The units eject button to eject the dvd tray wait for it to completely eject before putting a disc on the tray place your dvd r or dvd. Rw discs on the tray and press the eject button again to retract the disc into the unit next insert the cassette tape into the slot. And you should see a time value appear on the unit s lcd screen press.
The setup button on the remote pictured at the right this will bring up an on screen menu. When you see the menu press the ok button to enter the general setting menu now using the remotes arrow buttons navigate to recording press. Ok then navigate to dubbing mode and press ok again in this small sub menu make sure that vcr to dvd..
Is selected now you can press. The setup button again to exit changing the recording mode is optional. But for those who want more control over the quality and or duration of the video press. The remotes dvd button to switch.
The unit s source. You should see the indicator on the front of the unit change from vcr to dvd the modes can be toggled using the rec mode button. It will cycle through the different recording modes for a standard vhs to dvd recording this setting. Doesn t need to be altered more information regarding.
The recording modes and their characteristics can be found in our quickstart guide on the remote press. The vcr button once again watching for the indicator on the front of the unit to switch back to vcr from dvd. And now..
It s time to find the recording start point on our vhs tape press play on the devices remote control. And you ll see video from your vhs tape appear on the screen using the remotes rewind and fast forward buttons find the spot at which you want to begin recording and then press the pause button to pause it at that exact moment when the footage is paused on the moment. You want to begin press d. Dubbing to begin recording.
When you re done. Recording or the video is over you can press. The stop button on the remote at this point. You ll see a writing to disk progress bar.
Which will show the progress of your discs creation this may take longer. Depending on how much video. You recorded..
And what video mode. You selected earlier on the last step in the process is a step called finalization without finalizing. The disc. It will not be playable in dvd players or readable by computers therefore.
It is very important that you complete the finalization process shown here to start the finalization process once again tap the setup button to enter the main menu now once again using their emotes arrow buttons navigate to dvd menu in this smaller sub menu use the down arrow to go to finalize and tap. Ok. Choose yes at the prompt to begin the process. You will now see another progress bar at the bottom of your screen.
Once the finalization process is done you can ” ..
Thank you for watching all the articles on the topic DVD/VHS Recorder Tutorial. All shares of khurak.net are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.